Hot Selling Urban Buildings Traffic Barriers Flood Barriers Garage Doors Automatic Flood Barriers

• Customization: Available
• Texture of Material: Aluminium Alloy
• Function: Flood Control and Water Retention
• Model NO.: NF-HDFU-150
• Usage Scenarios: Parking Lot Entrance
• Is It Customized: Customizable
• Transport Package: Packing in Wooden Cases
• Specification: w30*h40*2.5mm
• Trademark: Newflag
• Origin: China
• HS Code: 7604299000
• Production Capacity: 2000square Meter/Mouth

Product Description

Product Parameters

Place of Origin	Wuxi,China
Product Name	Automatic Flood Barrier
Size	H0.6-1.0M, customized
Surface Treatment	Stainless Steel
Product Features	Fully automatic drived by water itself
Technics	Complicated Fabrication
Application	Flood Protection
OEM	Accept

 

Product lmage

Product Description

Advantage:
1. No power or human labor required, fully driven by water itself
2. Lightweight structure for manual operation;
3. Can be constructed in either ramp form sitting directly or ground or embedded form flush to ground.

Product Specification:
Flood Height:
H0.6-H1.5meter to be customized as per request;
Length:
Fits the doorway width between side walls (Supply in module);
Orer-Pass Weight:
Allow vehicle within 4.5 Metric Tons (higher strength can be customized if required).
Requirement:
1. Side Wall (to attach the end retaining rubber);
2. Flat ground plastering ±3mm;
3. Require ground slotting work for containing space if flush to ground is required.
4. Drainage inside the box can be considered to be pre-constructed before start the installation or prepare a small pump to drain the water inside after flood.
Product Composition:

Bill of Materials
ITEM	SPECIFICATION	FUNCTION
Floating Barrier Panel	Lmax.3000*Wmax.1500*T35mm PER MODULE	Floating Subject
Non-slip SS Sheet	T1.2mm	Anti-Slip
Alu. Joint Frame	W30*H40*2.5mm	Module Joint
Bottom Frame	SUS304L Square Tube 20*20*2mm	Structure Support
Speed Bump	H50*W100*L1000mm/PC	Low the vehicle speed
Water Inlet Grills	SUS304L  H55*W50*l000mm/PC	Water inlet
Pulling Wire Rope	∅5mm SS Wire Rope	Prevent over-flip
Foldable Back Rubber	T5mm Fiber Reinforced Rubber	Water stop at width
Rubber Fixing Frame	SUS304L T2*20mm	Fixing on barrier panel
Expansion Bolts	SUS304L M10*100mm	Structure fixing on ground
End Retaining Rubber	T5mm Fiber Reinforced Rubber	Water stop at wall
Fixing Frame on Wall	SUS304L T5*W30*L	End rubber fix on wall

NEWFLAG Automatic Flood Barrier which is hydrodynamic driven by rising flood water itself, can be customized in module supply form according to the doorway width at site. It consists of the bottom frame,floating barrier panel with non-slip surface in module supply, and the end sealing rubber attached to the side wall.The rising or retreating flood water will flip up or close down the barrier panel automatically and it does not require power or human to intervene.It can be also manual lifted by an adult due to its lightweight technology. The structure is designed simple to reduce the risk of failure and easy to repair or replace.

Installation Technical Requirements: the overall installation accuracy is ±5mm, ground flatness requirements ≤3mm/m. According to the requirements of site, it can be constructed in 1. Ramp form directly sitting on existing ground with speed bump attaching both sides (Product height when closed is approx.55-60mm above the ground); 2. Embedded form with top surface flush to ground by slotting the ground for containing space.
The weight of the lightweight barrier panel with great strength is about 18.5KGs/Square Meter which can withstand the crush of vehicle weights 4.2 metric tons. We can customize the barrier panel for the requirement even for container truck.

 

*Alarming system is optional if required.

Certifications

Company Profile

Newflag Technology Co., Ltd.,is a young star but professional expert in flood protection solution, located in Wuxi, Jiangsu Province committing to reliable flood mitigation system to control the global flood risk for both civilian flood protection and public water scheme purpose. Our products include Aluminum Demountable Flood Barrier, Glass Wall Flood Barrier, Automatic Flood Barrier, Freestanding Flood Barrier, Steel Flood Gate and so on.

 

WHY WORK WITH US: 1) Affordable Cost: we are in China's most advanced area near Shanghai where investment and technology concentrates, it gives us advantage to compete with products in Europe and America in cost. 2) Reliable Quality: We have had SGS Accreditation for our flood barrier according to British flood protection standard, and are approaching for FM approval and BSI Kitemark for flood abatement products. 3) Quick Delivery: With our hardworking experienced certified welder team as well as our automatic welding robot facility as well as well scheduled production plan, we guarantee every delivery on time. 4) Wide Application: Our products is not only good for civilian flood protection such as personal property, business building, factory front, ect, but also serving the public water schemes in large scales, with our capable experienced engineer team. 5) Quick Response: Our international sales team is serving you 24hours *7 days, any of your demand will have our response within 24 hours. 6) Comprehensive Service: You can enjoy pre-sales consultation, designing, engineering, supervising and constructing and after-sell service by our sales team and our own in-house structural engineering department. 7) Endless Innovation: We are always developing new products to enlarge the product list to solve flood mitigation for all scenarios.

 

Customer relations are characterized by our straightforward and transparent approach to communications. Our main objective is always the satisfaction of our customers, who regard us as a trustworthy partner dedicated to meeting their needs, as well as a trustworthy partner who will always fulfill this trust with new product innovations.

Packaging & Shipping

FAQ

Q: Are these flood barrier system permanent? A: For Demountable Flood Barrier, as the names shows, it is a kind of mobile flood barrier actually, only partial pre-installed (End post), the other parts including the central posts and barrier panel can be removed for storage after flood ends. But once it is deployed on the flood warning, the flood resistance is permanent. For Glass Flood Wall, it is permanently constructed to offer permanent flood protection performance but the glass is still able to be replaced in any case it breaks. For Freestanding Temporary Flood Barrier, it is fully removable without any construction.
Q: How do I choose between demountable flood barrier and the Freestanding Temporary Flood Barrier? A: Actually Demountable flood wall is a kind of temporary flood wall as well, because it is only part pre-installed, but it can be removed very easily after flood event to leave almost none visual intrusion to the landscape. Even when it is fully erected, the anodized aluminum appears elegant pleasant and tidy with none visual impact. And it offers definitely much better flood prevention performance than the conventional temporary barriers because temporary flood barrier is mainly for water division and it does not perform as much better as demountable flood barrier in water tightness. So it depends on your performance request.
Q: What is the difference between your flood barrier and a permanent flood dam? A: Constructing a permanent dam may be a good idea, but it costs millions of dollars, and the concrete dam will block the eye sight and really a great visual intrusion to local landscape. Comparing in cost, deploying our sectional barriers is a better idea in both cost budget and visual amenity.
Q: What is the material of the flood barrier? A: Aluminum Flood Barrier consisted of mainly well engineered argon arc welded aluminum extrusion profile, aluminum beams/barrier panel/stop logs or 3 layer laminated glass panel, with different gaskets including EPDM for posts and panels while PE/PU at bottom to the ground to prevent the water seepage. And it also contains some accessories as anchor plates and pressing tools. And Freestanding Flood Barrier is extruded by ABS plastic.

 

Q: Is this mobile flood wall heavy for operation? A: For metal barriers, it is made of light weighed aluminum, so basically it is easy to operate. For glass wall, it is really heavy because its 3 ply laminated structure if the pane is big and a crane would be required during installation.
Q: What is the flood protection height of demountable flood wall system? A: We can produce from 200 to 4600mm as per customer's requirement, the height can be increased or reduced by adding or removing the stop logs/barrier panel in the middle at an every 200mm. For glazing wall, the height will be fixed at design stage from required 400 to 1500mm, but thanks to the exactly same designed posts as the removable flood barrier, extra aluminum beams could be installed right sitting on top of the current glass to increase the flood protection height if any emergency.
Q: What is the maximum single span for the mobile flood panels and what is the total length limit? A: It depends on the height, if it is low, the MAX. span can reach 6 meters, but with the height increasing, the designed single span should be reduced accordingly to fit the load requirement for security reason by adding central posts to support. The total length is unlimited by adopting the central posts.

 

Q: What is the maximum single span for glass flood barrier? A: The max size we can offer is H1200*L3000mm or H1500*L2500mm. The total length is unlimited by adopting the central posts.
Q: Can the flood barrier be installed with curvature in an arc or for corners? A: At design stage for the special requirement on posts according to the site assessment, both of the frame barrier and the glass floodwall can be fabricated to fit any shapes perfectly including arc, parabolic or angels in any degrees. And for the standard posts, during the sliding of panels into the posts in installation, a 5 degrees of angle is allowed so an arc or curve could be reached together with the increase of central posts if the perimeter is long enough.
Q: Will the mobile flood board system require concrete foundations? A: It depends. The end post could be installed on front wall, on side wall or on bottom foundation. But if the opening is quite big and central post should be brought in, then it will need concrete foundation for fixing on the ground.
Q: How long will it take to deploy the metal barrier? A: For first time installation, the pre-installed parts will take some time, but after that, against each flood aleart, a team of 5 can quickly deploy a flood wall in length 100meter with the height 1meter within 1 hour. Q: Is the flood wall safe? A: The aluminum extrusion is all well engineered to offer robust and tough performance, it is designed to resist the impact of 20KN/M2. The compressed gaskets stops the water in a very small leakage which is allowed within standard.

 

Q: How can I repair the aluminum flood barrier and what is the warranty? A: Basically the main repair will be the seals/gaskets replacement which is low in cost and could be carried out very easily, and some cleaning and maintenance like stain on surface. The system is with a design life 20-40 years.
Q: How do you guarantee the performance of the flood protection system? A: We have a test station for load testing as well as a water tank for leakage test in house. And we have obtained the official test report from SGS according to Britsh Flood Protection Standard PAS1188, and material test report from China National Building Material Test Center. We are also approaching for FM Approval accreditation according to US standard.
Q: What extra service do you offer? A: Beside products supply and after-sales service, we can offer very comprehensive and people-orientated service according to the requirement of customers: Pre-sales consultation, AutoCad design drawing in 2D and 3D as per your site plan; Provide installation guidance and instructions, free online consultation throughout the construction process and Training files for your local installation team; Suggestion on storage warehouse location selection; Guidance on plan for flood season alert;

 

Q: Why should I work with you? 1) Affordable Cost: we are in China's most advanced area near Shanghai where investment and technology concentrates, it gives us advantage to compete with products in Europe and America in cost. 2) Reliable Quality: We have had SGS Accreditation for our flood barrier according to British flood protection standard, and are approaching for FM approval and BSI Kitemark for flood abatement products. 3) Quick Delivery: With our hardworking experienced certified welder team as well as our automatic welding robot facility as well as well scheduled production plan, we guarantee every delivery on time. 4) Wide Application: Our products is not only good for civilian flood protection such as personal property, business building, factory front, ect, but also serving the public water schemes in large scales, with our capable experienced engineer team. 5) Quick Response: Our international sales team is serving you 24hours *7 days, any of your demand will have our response within 24 hours. 6) Comprehensive Service: You can enjoy pre-sales consultation, designing, engineering, supervising and constructing and after-sell service by our sales team and our own in-house structural engineering department. 7) Endless Innovation: We are always developing new products to enlarge the product list to solve flood mitigation for all scenarios.